Cabinet Construction

Standard Case Construction Details

Screen Shot 2015-06-16 at 12.01.30 PM

 

CASE COMPONENT SPECIFICATIONS
Bottom Panel Gables 5/8″ (16 mm) particle board or plywood core, both side finished

Front edges with PVC edgeband to match door colour

Full Top Panel Back
Front Mullion (if required)
5/8″ (16 mm) particle board or plywood core, interior finished Solid Wood, 1 1/4″ (32 m.m) Wide, 13/16″ (20 mm) Deep
Adjustable Shelves 3/4″ (19 mm) particle board or plywood core, both side finished

Front edge with PVC edgeband to match interior finish

Shelf Holes Drilled every 2 1/2″ (64 mm) on center
Shelf Clips Metal non-locking clips (stirrup-shaped retainer clips for shipping)
Hinge Mounting Plates Height-adjustable metal mounting plate, 110 degree dip-on metal standard hinge is attached to doors
Adjustable Folding Legs Recycled Plastic folding leg system attached to bottom, shipped in the folded position

Standard Base Construction

Screen Shot 2015-06-16 at 12.02.14 PM
CASE COMPONENT SPECIFICATIONS
Bottom Panel Gables 5/8″ (16 mm) particle board or plywood core, both side finished

Front edges with PVC edgeband to match door colour

Full Top Panel Back
Front Mullion (if required)
5/8″ (16 mm) particle board or plywood core, interior finished Solid Wood, 1 1/4″ (32 m.m) Wide, 13/16″ (20 mm) Deep
Adjustable Shelves 3/4″ (19 mm) particle board or plywood core, both side finished

Front edge with PVC edgeband to match interior finish

Shelf Holes Drilled every 2 1/2″ (64 mm) on center
Shelf Clips Locking clear plastic clips pivot for easy removal or shelf
Hinge Mounting Plates Height-adjustable metal mounting plate, 110 degree dip-on metal standard hinge is attached to doors
Adjustable Folding Legs Recycled Plastic folding leg system attached to bottom, shipped in the folded position

Finished Case Construction

Screen Shot 2015-06-16 at 12.03.04 PM

 

Swipe to see more

CASE COMPONENT STANDARD FINISHED CASE SPECIFICATIONS METROPOLITAN FINISHED CASE PAINT MATTE & HIGHGLOSS FINISHE CASE
Bottom Panel
Gables
5/8″ (16 mm) particle boardor plyw/ood core, both side finished, front edges with edgeband t o match door colour. 3/4″ (19 mm) no added Urea- Formaldehyde particle board core, both side finished, front edges with engineered veneer to match door, 5/8″ (16mm) MDF core, paint finish.
Back 5/8″ (16 mm) particle board or plywood core, interior finished 3/4″ (19 mm) no added Urea- Formaldehyde particle board core, interior finished 5/8″ (16 mm) MDF core, paint finish.
Front Mullion (if required) SolidWood,1 1/4″(32mm) Wide, 13/16″ (20 mm) Deep N/A Pamt on Maple, 1 1/4″ (32 m m ) Wide, 13/16″ (20 mm) Deep
Adjustable Shelves 3/4″ (19 mm) particle board or plywood core, both side finished, front edge with edgeband to match door colour. 3/4″ (19mm) noadded Urea-Formaldehyde particle board core, both side finished, front edges with engineered veneer to match door. 3/4″ (19mm) MDFcore, paint finish.
Shelf Holes Drilled every 1-1/4″ (32 mm) on center    
Shelf Clips Metal non locking clips (stirrup-shaped retainer clips for shipping)    
Hinge Mounting Plates Height-adjustable metal mounting plate, 110 degree clip-on metal standard hinge is attached to doors    

Standard Wall Construction

Screen Shot 2015-06-16 at 12.03.32 PM
CASE COMPONENT SPECIFICATIONS
Bottom PanelGables 5/8″ (16 mm) particle board or plywood core, both side finishedFront edges with PVC edgeband to match door colour
Full Top PanelBack
Front Mullion (if required)
5/8″ (16 mm) particle board or plywood core, both side finishedFront edges with PVC edgeband to match door colour
Adjustable Shelves 3/4″ (19 mm) particle board or plywood core, both side finishedFront edge with PVC edgeband to match interior finish
Shelf Holes Drilled every 2 1/2″ (54 mm) on center
Shelf Clips Locking clear plastic clips pivot for easy removal or shelf
Hinge Mounting Plates Height-adjustable metal mounting plate, 110 degree dip-on metal standard hinge is attached to doors

 

  • All cases are crafted with 15.7mm multi-core plywood. Plywood tolerance is +/- .3mm, which meets or exceeds HPVA standards.
  • Plywood case faces and backs are faced with clear-finished Birch
  • All wall units over 30″ high have a fixed shelf 300mm from the top of the case.

Specification is for plywood and MDF cabinetsScreen Shot 2015-06-16 at 12.04.02 PM

Your cabinets are 5/8″ plywood core

You have soft close drawer runners

Standard door hinges